- May 31, 2019
- By admin
- In Bad tinting
As a human, it is quite normal to have some fears related to our investments. It has been commonly observed that car tints are usually ruined with bubbles, creases and some sort of discoloration with the passage of time. But one can easily avoid this kind of problem by selecting top quality car tinting service. In this article, we will tell you how to spot bad tint and remedies to avoid this problem.
Signs Of Bad Tint
If you have your car tinted for the very first time, here are some signs of bad tints to look for:
Laser cutters are used in order to design the films according to your car. So ideally the edges of the tint should be clearly equal to the edge of the window glass, but if you observed it little wavy then it is a bad tint.
Although purple is one of the favorite colors among people but it looks odd when it comes to the windows of the car. As a result of the low-quality color of dye used in the tinting process, a purple color appears.
Bubbles are very dangerous and can reduce visibility and cause serious harm to you more than your car. Even the little bubbles are an obvious deal breaker and can be a result of severe accident.
- The Dot Matrix
Dot matrix is a pattern that appears at the edges of your car windows. They are created from the surrounding glass thus making it hard for the tinted film to completely adhere to.
- Signal Interference
Low quality of car tints can cause signal interference and reduces your mobile signals. Metallic elements in the films can distort mobile or other radio signals and make your devices useless while driving.
Remedies to handle bad tint problems
Here are some remedies which you should follow if you observe any of the above mentioned bad tint sign on your car
- Consult Professional car tint installer:
Seriously this is the best and simplest way to choose if you have invested a good amount of money to apply tinting service on your vehicle and the warranty of the service is still valid.
- Remove the small bubbles by pressing them hard:
You can remove bubbles from your tint by first heating the film using a hair dryer and then pressing out the bubbles hard by using a credit card or any other hard card.
- Re-Adhere the affected tinted parts:
You can re-adhere the peeling parts of your car by following these steps:
- Prepare a solution using dish wash and water
- Clean the peeling film by using the above-prepared solution
- Use a squeegee to level the film back
- Let the film dry thoroughly
The professionals present in our platform at Katy Car Audio are skilled and trained enough to offer the best quality of window tinting services on your car with the best films present in the market. Hope you find this article useful in gaining all the relevant information related to the signs of bad tint and remedies in order to overcome the problems of bad tint.